FixByModel
F01

Maytag F01: Main electronic control board failure

F01 means the dryer's main control board has detected an internal fault in itself. A power reset sometimes clears a one-time glitch, but a repeating F01 usually means the board must be replaced.

May need a technician

By the FixByModel editorial team · Verified 2026-09 · Researched against manufacturer support & repair references (below)

Most likely causes

  1. Failed main electronic control board (most likely if the code returns)
  2. One-time electronic glitch or power surge
  3. Loose or corroded connectors on the control board
  4. Damaged wiring feeding the board
Before you start — unplug the dryer, and on a gas model shut off the gas supply. Let it cool first — the drum, heater and exhaust can be hot. If a step involves the heating element, wiring, or opening the cabinet and you're unsure, stop and call a qualified technician.

Step-by-step fix

1Reset powerUnplug the dryer or switch off the breaker for about 10 minutes, then restore power to clear a possible glitch.
2Run a test cycleStart a short cycle and see whether F01 returns.
3Cut the powerIf it comes back, unplug the dryer before opening the console or cabinet.
4Check board connectorsInspect the main control board's connectors and wiring for looseness, corrosion, or scorching.
5Replace the boardIf F01 keeps returning with connections intact, replace the main electronic control board.

Still showing F01?

If you’ve worked through every step and F01 keeps returning, an internal part likely needs testing and replacement. That’s a job for a qualified appliance technician, who can measure the suspect part against the service-manual spec before replacing it.

Which models this applies to

Maytag dryers. Older Maytag Bravos and Cabrio-platform dryers with F## fault codes and an electronic main control board.

FAQ

What does Maytag F01 mean?

Main electronic control board failure. F01 means the dryer's main control board has detected an internal fault in itself. A power reset sometimes clears a one-time glitch, but a repeating F01 usually means the board must be replaced.

What causes Maytag F01?

The most likely cause is failed main electronic control board (most likely if the code returns). Other causes include One-time electronic glitch or power surge; Loose or corroded connectors on the control board; Damaged wiring feeding the board.

Can I fix Maytag F01 myself?

Some checks are DIY, but this code often points to an internal component, so it may need a qualified technician.