FixByModel
bE

Samsung bE: Stuck or jammed button

The control panel senses a button that is stuck down or continuously pressed.

DIY fix

By the FixByModel editorial team · Verified 2026-09 · Researched against manufacturer support & repair references (below)

Most likely causes

  1. A button physically stuck or sticky
  2. Debris or residue around the buttons
  3. Moisture in the control panel
  4. Faulty control panel or board
Before you start — unplug the dryer, and on a gas model shut off the gas supply. Let it cool first — the drum, heater and exhaust can be hot. If a step involves the heating element, wiring, or opening the cabinet and you're unsure, stop and call a qualified technician.

Step-by-step fix

1Power offTurn the dryer off completely.
2Press each buttonPush and release every button to free any that are stuck.
3Clean the panelWipe around the buttons to remove debris or residue.
4RestartPower the dryer back on and retry; if bE returns, the panel may need service.

Still showing bE?

If you’ve worked through every step and bE keeps returning, an internal part likely needs testing and replacement. That’s a job for a qualified appliance technician, who can measure the suspect part against the service-manual spec before replacing it.

Which models this applies to

Samsung dryers. Samsung dryers; may also show as 6E, bE2, 6E2, bC2, or 6C2.

FAQ

What does Samsung bE mean?

Stuck or jammed button. The control panel senses a button that is stuck down or continuously pressed.

What causes Samsung bE?

The most likely cause is a button physically stuck or sticky. Other causes include Debris or residue around the buttons; Moisture in the control panel; Faulty control panel or board.

Can I fix Samsung bE myself?

Usually yes. Start by working through the steps above, beginning with: turn the dryer off completely.