FixByModel
E13

Frigidaire E13: Water or air leak detected

The washer senses a water leak in the tub or an air leak in the pressure-sensing air bell. It should be checked promptly to avoid water damage.

May need a technician

By the FixByModel editorial team · Verified 2026-09 · Researched against manufacturer support & repair references (below)

Most likely causes

  1. Leak in the outer wash tub
  2. Cracked or loose air hose to the pressure switch
  3. Faulty water-level pressure switch or sensor
Where water escapes
1Door gasket
2Hoses & clamps
3Base tray
4Leak sensor

Schematic illustration of a typical washing machine — not your exact model.

Before you start — unplug the appliance and turn off the water supply. You'll be working near water and electrical parts, and drained water can be hot. If a step involves the pump, wiring, or opening the cabinet and you're unsure, stop and call a qualified technician.

Step-by-step fix

1Stop and unplugEnd the cycle and unplug the washer, then check the floor around it for standing water.
2Look for leaksInspect visible hoses, the door seal, and the tub area for drips or moisture.
3Check the air hoseWith power off, confirm the small pressure-sensor air hose is attached and not cracked.
4Get it servicedBecause tub and pressure-system leaks are internal, have a technician diagnose and repair the source.

Still showing E13?

If you’ve worked through every step and E13 keeps returning, an internal part likely needs testing and replacement. That’s a job for a qualified appliance technician, who can measure the suspect part against the service-manual spec before replacing it.

Which models this applies to

Frigidaire washing machines. Front-load models (Affinity, Gallery, Professional)

FAQ

What does Frigidaire E13 mean?

Water or air leak detected. The washer senses a water leak in the tub or an air leak in the pressure-sensing air bell. It should be checked promptly to avoid water damage.

What causes Frigidaire E13?

The most likely cause is leak in the outer wash tub. Other causes include Cracked or loose air hose to the pressure switch; Faulty water-level pressure switch or sensor.

Can I fix Frigidaire E13 myself?

Some checks are DIY, but this code often points to an internal component, so it may need a qualified technician.