FixByModel
006

GE 006: Stuck button on control panel

The control detects a button on the panel that is being held down or stuck. Freeing the button usually clears the code; if not, the panel or board needs attention.

DIY fix

By the FixByModel editorial team · Verified 2026-09 · Researched against manufacturer support & repair references (below)

Most likely causes

  1. A control panel button physically stuck or jammed
  2. Debris or moisture under a button
  3. Failed control panel or touchpad
  4. Faulty main control board
Before you start — unplug the dryer, and on a gas model shut off the gas supply. Let it cool first — the drum, heater and exhaust can be hot. If a step involves the heating element, wiring, or opening the cabinet and you're unsure, stop and call a qualified technician.

Step-by-step fix

1Press each buttonFirmly press and release every button on the panel to free the stuck one.
2Clean the panelWipe around the buttons to remove debris or moisture that could hold one down.
3Reset powerUnplug the dryer briefly, restore power, and check if the code clears.
4Replace partsIf the code persists, replace the damaged control panel; if that fails, replace the main control board.

Still showing 006?

If you’ve worked through every step and 006 keeps returning, an internal part likely needs testing and replacement. That’s a job for a qualified appliance technician, who can measure the suspect part against the service-manual spec before replacing it.

Which models this applies to

GE dryers. GE front-load dryers with electronic controls, model numbers beginning GFD (and related GFV/GTD platform).

FAQ

What does GE 006 mean?

Stuck button on control panel. The control detects a button on the panel that is being held down or stuck. Freeing the button usually clears the code; if not, the panel or board needs attention.

What causes GE 006?

The most likely cause is a control panel button physically stuck or jammed. Other causes include Debris or moisture under a button; Failed control panel or touchpad; Faulty main control board.

Can I fix GE 006 myself?

Usually yes. Start by working through the steps above, beginning with: firmly press and release every button on the panel to free the stuck one.