FixByModel
008 / 00d

GE 008 / 00d: Door switch not opening

The dryer ran several cycles without ever sensing the door open, so the control flags the door switch. It usually means the switch or its wiring has failed.

DIY fix

By the FixByModel editorial team · Verified 2026-09 · Researched against manufacturer support & repair references (below)

Most likely causes

  1. Loose or corroded wiring at the door switch
  2. Damaged wire harness to the switch
  3. Failed door switch
Before you start — unplug the dryer, and on a gas model shut off the gas supply. Let it cool first — the drum, heater and exhaust can be hot. If a step involves the heating element, wiring, or opening the cabinet and you're unsure, stop and call a qualified technician.

Step-by-step fix

1Cut powerUnplug the dryer or turn off its breaker before opening the cabinet.
2Reseat the wiringReconnect any loose wires at the door switch.
3Check the harnessInspect the wire harness and replace it if the wiring is damaged.
4Replace the switchIf the wiring is sound, replace the door switch, then restore power and retest.

Still showing 008 / 00d?

If you’ve worked through every step and 008 / 00d keeps returning, an internal part likely needs testing and replacement. That’s a job for a qualified appliance technician, who can measure the suspect part against the service-manual spec before replacing it.

Which models this applies to

GE dryers. GE front-load dryers with electronic controls, model numbers beginning GFD (and related GFV/GTD platform).

FAQ

What does GE 008 / 00d mean?

Door switch not opening. The dryer ran several cycles without ever sensing the door open, so the control flags the door switch. It usually means the switch or its wiring has failed.

What causes GE 008 / 00d?

The most likely cause is loose or corroded wiring at the door switch. Other causes include Damaged wire harness to the switch; Failed door switch.

Can I fix GE 008 / 00d myself?

Usually yes. Start by working through the steps above, beginning with: unplug the dryer or turn off its breaker before opening the cabinet.